ac/mic-C414-XL11-MP MICROPHONE SET
ac/mic-C414-XL11-MP MICROPHONE SET
ac/mic-C414-XL11-MP MICROPHONE SET

ac/mic-C414-XL11-MP MICROPHONE SET

Regular price $2,099.00

C414-XL11-MP Matched Pair Stereo Set Package

A Matched Pair of Ultra-versatile Condenser Mics!

From the leading broadcast facilities world-wide to the recording studios and the performance stages that have hosted the top musical artists of all genres for more than 60 years, the AKG C414 multi-pattern condenser microphone needs little introduction. There are few microphones that are as widely accepted as a de facto part of any professional engineer's mic locker as this famous microphone. Now, you can own a matched pair of C414 XL IIs at an affordable price with the C414 XL II/ST bundle.

The C414 XLII Matched Pair Stereo Set Package includes: 2 x C414 XLII 2 x Elastic spider suspensions; 2x Stand adapter 2 x Windscreen; 1 x Stereo mounting bar Aluminum carrying case; Measurement documents

AKG C414 XL II/ST Matched Pair of Multi-pattern Condenser Microphones Features at a Glance:
  • Omni, wide cardioid, cardioid, hypercardioid, figure eight, and four intermediate pickup patterns
  • Lock Mode disables all controls easily for live and installation use
  • Incredible Dynamic Range of 152 dB
  • Three different bass cut filters and three pre-attenuation levels
  • Peak Hold LED even detects shortest overload peaks
  • Paired using AKG's sophisticated computer-aided matching method
  • Highest possible correlation over the whole frequency range and virtually identical sensitivity
  • Includes carrying case, two windscreens, a stereo bar, and two spider-type shock mounts
  • Frequency range: 20 to 20,000 Hz
  • Sensitivity: 20 mV/Pa (-34 dBV) +/-0.5 dB
  • Max. SPL: 200/400/800/1600 Pa = 140/146/152/158 dB (0/-6/-12/-18 dB) for 0.5% THD
  • Equivalent noise level: 6 dB-A (0 dB preattenuation) (IEC 60268-4)
  • Signal/noise ratio: 88 dB
  • Preattenuation pad: 0 dB, -6 dB, -12 dB, -18 dB, switchable
  • Bass cut filter slope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
  • Impedance: <=200 ohms
  • Recommended load impedance: >= 2,200 ohms
  • Supply voltage: 48 V phantom power to DIN/IEC
  • Powering: approximately 4 mA
  • Connector: 3-pin XLR to IEC
  • Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
  • Net weight: 300g (10.6oz.)
  • Requires +48V phantom power to DIN/IEC

Tech Specs

  • Microphone Type:Condenser
  • Mono/Stereo:Stereo Pair
  • Polar Pattern:Omni, Wide Cardioid, Cardioid, Hypercardioid, Figure-8
  • Diaphragm Size:1" (25.4mm)
  • Frequency Response:20Hz-20kHz
  • Max SPL:140dB (158dB w/18dB Pad)
  • Output Impedance:200 ohms
  • Signal to Noise Ratio:88dB
  • Self Noise:6dB
  • Low Cut Filter:40Hz, 80Hz (-12dB/octave), 160Hz (-6dB/octave)
  • Pads:-6dB, -12dB, -18dB
  • Color:Dark Grey/Gold
  • Connector:XLR
  • Weight:0.66 lbs. (Per Mic)
  • Included Accessories:Shock Mounts, Windscreens, Stereo Bar, Aluminum Carry Case
  • Manufacturer Part Number:3059X00240